MC660 / MC666 Network Analizer
MC 660 / MC 666 - Network analyzer
The MC660 / MC666 network analyzer is used for permanent analysis of electricity supply quality in compliance with the SIST EN 50160 standard. Reports are stored in the internal memory for the period of the last 7 years.
Moreover, more than 170,000 deviations of the measurements from the standard values are stored, which enables finding eventual reasons for the problems in network. Optional limits and required quality in a monitored period can be defined for each monitored characteristic.
The following characteristics are measured and recorded:
* Frequency deviations
* Voltage deviations
* Voltage dips
* Voltage interruptions
* Voltage unbalances
* Over-voltages
* Fast voltage changes
* Flicker intensity
* THD
* Harmonics
Features:
* Evaluation of the electricity supply quality in compliance with SIST EN 50160 (MC666 / MC660)
* Measurements of instantaneous values of more than 150 quantities (U, I, P, Q, S, PF, PA, f, φ, THD, MD, energy, energy cost by tariffs, etc.)
* Accuracy class 0.5
* Harmonic analysis of phase, phase-to-phase voltages and currents up to the 63rd harmonic (MC666/MC660), up to the 31st harmonic (MC656/MC650)
* Recording up to 32 measurements and 32 alarms in the internal memory (8 MB flash)
* Measurements of 40 minimal and maximal values in different time periods
* 32 adjustable alarms
* Frequency range from 16 Hz to 400 Hz
* RS 485 communication up to 115,200 bit/s
* MODBUS and DNP3 communication protocol
* Up to 4 (2+2) inputs or outputs (pulse outputs, alarm outputs, tariff inputs, digital inputs)
* Universal power supply 48-276V AC, 20-300V DC
* Graphical LCD; 128 x 64 dots with illumination
* Direct 65A connection (MC666 / MC656)
* CT 5A connection (MC660 / MC650)
* Housing for DIN rail mounting
* Adjustable tariff clock, display of electric energy consumption in optional currency
* Multilingual support
* User-friendly PC MiQen software
* Protective cover for terminals (possible seal up against non-authorized access)
|
MC650 MC656 Network Recorder
MC 650 / MC 656 - Network recorder
Network recorder is used for monitoring, measuring and recording measurements of electric quantities of electrical power distribution system. Up to 32 measurements and up to 32 alarms are recorded in the internal memory. The memory is separated into two sections for measurements (A and B) and one section for recording alarms. The memory division is defined by the user via communication.
Features:
* Measurements of instantaneous values of more than 150 quantities (U, I, P, Q, S, PF, PA, f, φ, THD, MD, energy, energy cost by tariffs, etc.)
* Accuracy class 0.5
* Harmonic analysis of phase, phase-to-phase voltages and currents up to the 31st harmonic
* Recording up to 32 measurements and 32 alarms in the internal memory (8 MB flash)
* Measurements of 40 minimal and maximal values in different time periods
* 32 adjustable alarms
* Frequency range from 16 Hz to 400 Hz
* RS 485 communication up to 115,200 bit/s
* MODBUS and DNP3 communication protocol
* Up to 4 (2+2) inputs or outputs (pulse outputs, alarm outputs, tariff inputs, digital inputs)
* Universal power supply 48-276V AC, 20-300V DC
* Graphical LCD; 128 x 64 dots with illumination
* Direct 65A connection (MC 656)
* CT 5A connection (MC 650)
* Housing for DIN rail mounting
* Adjustable tariff clock, display of electric energy consumption in optional currency
* Multilingual support
* User-friendly PC MiQen software
* Protective cover for terminals (possible seal up against non-authorized access)
|
| |
MC640 / MC646 Multifunction Meter
MC 640 / MC 646 - Multifunction meter
The MC640 / MC646 multifunction meter is intended for monitoring and measuring electrical quantities of a three-phase electric-energy distribution system. The meter is provided with 32 program adjustable alarms, up to four input or output modules and communication. With the RS 485 communication the meter can be set and measurements can be checked. The meter functions also as an energy meter, with the additional function of cost management by tariffs. A tariff input or a tariff clock can be set. At tariff clock setting, four periods and four work groups as well as electric energy price for each period and work groups (16 different price periods) are available. Additionally 20 places are available for setting holidays or days when special tariff rules are valid. As anenergy meter it records energy in all four quadrants and four tariffs.
Features:
* Measurements of instantaneous values of more than 150 quantities (U, I, P, Q, S, PF, PA, f, φ, MD, energy, energy cost by tariffs, etc.)
* Accuracy class 0.5
* Harmonic analysis of phase, phase-to-phase voltages and currents up to the 31st harmonic
* Measurements of 40 minimal and maximal values in different time periods
* 32 adjustable alarms
* Frequency range from 16 Hz to 400 Hz
* RS 485 communication up to 115,200 bit/s
* MODBUS and DNP3 communication protocol
* Up to 4 (2+2) inputs or outputs (pulse outputs, alarm outputs, tariff inputs, digital inputs)
* Universal power supply 48-276V AC, 20-300V DC
* Graphical LCD 128 x 64 dots with illumination
* Direct 65A connection (MC646)
* CT 5A connection (MC640)
* Housing for DIN rail mounting
* Adjustable tariff clock, display of electric energy consumption in optional currency
* User-adjustable display of measurements
* Multilingual support
* User-friendly PC MiQen software
* Protective cover for terminals (possible seal up against non-authorized access)
|
MC760 / UMC760 Network Analizer
MC 760 / UMC 760 - Network analyzer
The MC 760 network analyzer is used for permanent analysis of electric voltage quality in compliance with the SIST EN 50160 standard. Records are stored in the internal memory for the period of the last 7 years. Moreover, more than 170,000 deviations of the measured quantities from the standard values are stored, which enables finding of eventual reasons for the problems on network. Optional limits and required quality in a monitored period can be defined for each monitored characteristic.
The meter measures and records the following characteristics:
* Frequency deviations
* Voltage deviations
* Voltage clips
* Voltage interruptions
* Voltage unbalances
* Over-voltages
* Fast voltage changes
* Flicker intensity
* THD
* Harmonics
Features:
* Evaluation of the quality of electric voltage in compliance with SIST EN 50160
* Measurements of instantaneous values of more than 140 quantities (U, I, P, Q, S, PF, PA, f, φ, THD, MD, energy, energy price by tariffs, etc.).
* Accuracy class 0.5 or 0.2 (on demand)
* Harmonic analysis of phase, phase-to-phase voltages and currents up to the 63th harmonics
* Recording up to 32 measured quantities and alarms in the internal memory (8 MB flash)
* Measurements of 40 minimal and maximal values in different time periods
* 32 adjustable alarms
* Wide frequency range from 16 Hz to 400 Hz
* RS 232/RS 485 communication up to 115,200 bit/s or Ethernet communication
* MODBUS and DNP3 communication protocol
* MMC memory card for data transmission, setting and upgrading
* Up to 4 inputs or outputs (analogue outputs, pulse outputs, alarm outputs, tariff inputs)
* Universal or AC power supply
* Graphical LCD 128 x 64 dots with illumination
* Automatic range of nominal current up to 5 A and nominal voltage up to 500 V
* Adjustable tariff clock, display of electric energy consumption in optional currency
* Multilingual support
* User-friendly PC MiQen software
* 128 samples in one period
|
| |
MC750 / UMC750 Network Recorder
MC 750 / UMC 750 - Network recorder
The MC 750 network recorder is used for recording of electrical parameters in electrical grid. Records are stored in the internal memory and are available for further analysis. It records up to 32 measuring quantities and 32 alarms in the internal memory and measures more than 140 electrical quantities. With MC 750 it is easy to monitor electricity consumption in optional currency.
Features:
* Measurements of instantaneous values of more than 140 quantities (U,
I, P, Q, S, PF, PA, f, φ, THD, MD, energy, energy price by tariffs, etc.).
* Accuracy class 0.5 or 0.2 (on demand)
* Recording up to 32 measured quantities and alarms in the internal memory (4 MB flash)
* Measurements of 40 minimal and maximal values in different time periods
* 32 adjustable alarms
* Wide frequency range from 16 Hz to 400 Hz
* RS 232/RS 485 communication up to 115,200 bit/s or Ethernet communication
* MODBUS and DNP3 communication protocol
* MMC memory card for data transmission, setting and upgrading
* Up to 4 inputs or outputs (analogue outputs, pulse outputs, alarm outputs, tariff inputs)
* Universal or AC power supply
* Graphical LCD 128 x 64 dots with illumination
* Automatic range of nominal current up to 5 A and nominal voltage up to 500 V
* Adjustable tariff clock, display of electric energy consumption in optional currency
* Multilingual support
* User-friendly PC MiQen software
* 128 samples in one period
|
MC740 / UMC740 Multifunction Meter
MC 740 / UMC 740 - Multifunction meter
The MC 740 multifunction meter is intended for monitoring and measuring electrical quantities of a three-phase electric-energy distribution system. The meter is provided with 32 program adjustable alarms, up to four inputs or outputs and communication. With the RS 232/RS 485 or Ethernet communication the meter can be set and measurements can be checked. The meter functions also as an electricity meter, with the additional function of cost management by tariffs. A tariff input or a tariff clock can be set. At tariff clock setting, four periods and four work groups as well as electric energy price for each period and a work group (16 different price periods) are available. Additionally, 20 places are available for setting holidays or days when special tariff rules are valid. As an electricity meter it records energy in all four quadrants in four tariffs.
Features:
* Measurement of instantaneous values of more than 130 quantities (U, I, P, Q, S, PF, PA, f, φ, MD, energy, energy price by tariffs, etc.).
* Accuracy class 0.5 or 0.2 (on demand)
* Measurement of 40 minimal and maximal values in different time periods
* 32 adjustable alarms
* Wide frequency range from 16 Hz to 400 Hz
* RS 232/RS 485 communication up to 115,200 bit/s or Ethernet communication
* MODBUS and DNP3 communication protocol
* MMC memory card for setting and upgrading the meter
* Up to 4 inputs or outputs (analogue outputs, pulse outputs, alarm outputs, tariff inputs)
* Universal or AC power supply
* Graphic LCD 128 x 64 dots with illumination
* Automatic range of nominal current up to 5 A and nominal voltage up to 500 V
* Adjustable tariff clock, display of electric energy consumption in optional currency
* Multilingual support
* User-friendly PC MiQen software
* 128 samples in one period
|
| |
MC720 / UMC720 Energy Meter
MC 720 / UMC 720 - Energy meter
The meter is intended for monitoring and measuring electrical quantities of three-phase electric-energy distribution system. It can be set and software can be upgraded by means of the MMC memory card. The MC 720 energy meter records energy like the electricity meter in all four quadrants in four tariffs. Up to 4 pulse outputs or tariff inputs are available for measurements control.
Features:
* Measurements of instantaneous values of 70 quantities (U, I, P, Q, S, PF, PA, f, φ…)
* Energy
* Accuracy class 0.5 or 0.2 (on demand)
* Wide frequency range from 16 Hz to 400 Hz
* MMC memory card for setting and upgrading the meter
* Up to 4 inputs or outputs (Pulse outputs, tariff inputs)
* Universal or AC power supply
* Graphic LCD 128 x 64 dots with illumination
* Automatic range of nominal current up to 5 A and nominal voltage up to 500 V
* Multilingual support
* User-friendly PC MiQen software for setting via MMC
* 128 samples in one period
|
MC710 / UMC710 Power Meter
MC 710 / UMC 710 - Power meter
The meter is intended for monitoring and measuring electrical quantities of three-phase electric-energy distribution system. It replaces some analogue instruments. It can be set and software can be upgraded by means of the MMC memory card.
Features:
* Measurements of instantaneous values of 70 quantities (U, I, P, Q, S, PF, PA, f, φ…)
* Accuracy class 0.5 or 0.2 (on demand)
* Wide frequency range from 16 Hz to 400 Hz
* MMC memory card for setting and upgrading the meter
* Universal or AC power supply
* Graphic LCD 128 x 64 dots with illumination
* Automatic range of nominal current up to 5 A and nominal voltage up to 500 V
* Multilingual support
* User-friendly PC MiQen software for setting via MMC
* 128 samples in one period
|
| |
|
